Hi, new to this forum so hello everyone.
I've got a Megane III Dynamique 180 Tce which had head failure due to the exhaust camshaft pulley slipping. Bent all the valve's In/Ex.
Had head reconditioned (new Valves, Guides, 0.010in skim) and rebuilt engine.
Runs fine, no issues.
I do however have a warning light problem that I can not diagnose.
The spanner symbol is illuminated and a "CHECK VEHICLE" message is displayed on the clock pod display.
Service light has been re-set, so eliminate that.
Run a full diagnostic check and there are no fault codes displayed.
Any help would be appreciated.
Thanks, JP
I've got a Megane III Dynamique 180 Tce which had head failure due to the exhaust camshaft pulley slipping. Bent all the valve's In/Ex.
Had head reconditioned (new Valves, Guides, 0.010in skim) and rebuilt engine.
Runs fine, no issues.
I do however have a warning light problem that I can not diagnose.
The spanner symbol is illuminated and a "CHECK VEHICLE" message is displayed on the clock pod display.
Service light has been re-set, so eliminate that.
Run a full diagnostic check and there are no fault codes displayed.
Any help would be appreciated.
Thanks, JP
Aucun commentaire:
Enregistrer un commentaire