My 2002 Scenic 1.8 has had an irratating vibration/knocking for a while and the garage have suggested its the inner anti roll bar bushes, they have also just come up as an advisory on the MOT, so its time to replace them!
I have measured the bar and have the correct diameter bushes on the way.
Now is it just a case of unbolt the clamp, pop out the old bush, grease the new one and pop it back on, then repeat on the other side.
The car will be on its wheels, so the load on the bar will be even.
The haynes manual only shows how to remove/refit the whole bar, but as the bushes are split I'm assuming the inner ones can be done with the bar in place? Any tips or advise on unknown perils greatly appreciated!
Thanks
I have measured the bar and have the correct diameter bushes on the way.
Now is it just a case of unbolt the clamp, pop out the old bush, grease the new one and pop it back on, then repeat on the other side.
The car will be on its wheels, so the load on the bar will be even.
The haynes manual only shows how to remove/refit the whole bar, but as the bushes are split I'm assuming the inner ones can be done with the bar in place? Any tips or advise on unknown perils greatly appreciated!
Thanks
Aucun commentaire:
Enregistrer un commentaire