1.5 dci
Ok so set up this to give my injectors a clean out as after doing a leak test one was too much and another too little. I was hoping this would sort the injection fault out.
I'm trying to narrow down the list. I can hear the injectors clicking with a screw driver when the engine is running.
The purge didn't really do to much, not like what i seen on other videos on the ole'tube.
This is my set up
http://ift.tt/1KTPCy2
Green in red return, yes a catheter bag
http://ift.tt/1KTPCy2
http://ift.tt/1KTPA9w
So where the return pipe returns from the pump when i turn the engine off and then back on air bubbles are present just after when the engine starts running. It is a little of a frothy burst, but more like if you open a shaken up bottled of coke, where all the bubbles rise. Now after the engine warmed up this happened less. I had the injectors out the other day and used the same copper fire washers, or could this be something else, or nothing.
My next port of call is check all connections hook it up to the can clip and make sure all the injectors are coded in. Any other ideas?
Ok so set up this to give my injectors a clean out as after doing a leak test one was too much and another too little. I was hoping this would sort the injection fault out.
I'm trying to narrow down the list. I can hear the injectors clicking with a screw driver when the engine is running.
The purge didn't really do to much, not like what i seen on other videos on the ole'tube.
This is my set up
http://ift.tt/1KTPCy2
Green in red return, yes a catheter bag
http://ift.tt/1KTPCy2
http://ift.tt/1KTPA9w
So where the return pipe returns from the pump when i turn the engine off and then back on air bubbles are present just after when the engine starts running. It is a little of a frothy burst, but more like if you open a shaken up bottled of coke, where all the bubbles rise. Now after the engine warmed up this happened less. I had the injectors out the other day and used the same copper fire washers, or could this be something else, or nothing.
My next port of call is check all connections hook it up to the can clip and make sure all the injectors are coded in. Any other ideas?
liqui moly diesel purge air bubbles on start up
Aucun commentaire:
Enregistrer un commentaire