Hi guys, Just done the timing belt and waterpump on my clio 2 1.9 DTI.
How do I bleed the cooling system as my car has no bleed screws anywhere that I can see.
There is none on the thermostat housing, none anywhere that I can see on the heater matrix hoses, none that I can feel on any of the coolant hoses and there is nothing on the radiator (I have read guides for the megane and scenic with bleed hoses but im almost positive there are none on mine).
Im pretty sure I am close as I have roughly 5 litres of coolant in the system, but the rad wont heat up nor will the heating.
The temp gauge seems to be getting a reading but I cant run the car for long as the expansion bottle starts over flowing.
Thanks for reading. Hope I can be of some use to others :)
How do I bleed the cooling system as my car has no bleed screws anywhere that I can see.
There is none on the thermostat housing, none anywhere that I can see on the heater matrix hoses, none that I can feel on any of the coolant hoses and there is nothing on the radiator (I have read guides for the megane and scenic with bleed hoses but im almost positive there are none on mine).
Im pretty sure I am close as I have roughly 5 litres of coolant in the system, but the rad wont heat up nor will the heating.
The temp gauge seems to be getting a reading but I cant run the car for long as the expansion bottle starts over flowing.
Thanks for reading. Hope I can be of some use to others :)
Aucun commentaire:
Enregistrer un commentaire