Hi I have a Renault scenic 04 plate that the heater motor had packed in. Bought a new one and replacement wire loom.
Followed a guide on the forum to remove the dashboard with no problems at all.
Put everything back together in reverse order, when disconnecting there where only 2 plugs not connected to anything. 1 coming off the loom wire with 2 small prong plug and one by the handbrake.
Pretty sure these ain't the issue but once all back together heaters working lights locking everything apart from when I ingage the clutch and press start nothing at all show oil OK on display and clock displays 0 mpg but the engine won't start.
Any ideas greatly appreciated
Followed a guide on the forum to remove the dashboard with no problems at all.
Put everything back together in reverse order, when disconnecting there where only 2 plugs not connected to anything. 1 coming off the loom wire with 2 small prong plug and one by the handbrake.
Pretty sure these ain't the issue but once all back together heaters working lights locking everything apart from when I ingage the clutch and press start nothing at all show oil OK on display and clock displays 0 mpg but the engine won't start.
Any ideas greatly appreciated
Aucun commentaire:
Enregistrer un commentaire