Hi all,
I have a 2006 56 plate Master 2.5 dci.
It just wont start.
I've had the injectors checked no probs even swapped them with a good running vans.
I've changed the crank sensor (Delphi diagnostics crank speed is showing approx 250 ish when cranking and back to 0 when not cranking)
The van is getting fuel to the injectors and the bulb primer is hard) Fuel Rail pressure is about 250-290 and goes of when not cranking.
The engine did previously start ran sweet - took ages to start and since standing cant get it to start.
Only fault codes are dp209 something to do with egr valve positioning. Ive blanked of the egr and noticed a wire is broken in the plug. Would this cause it to not start?
Immobiliser light goes off too.
Its trying to start and a little bit of smoke coming out but just wont grrr. Help !!:devil::confused::crazy:: Mad:: Moonie:
I have a 2006 56 plate Master 2.5 dci.
It just wont start.
I've had the injectors checked no probs even swapped them with a good running vans.
I've changed the crank sensor (Delphi diagnostics crank speed is showing approx 250 ish when cranking and back to 0 when not cranking)
The van is getting fuel to the injectors and the bulb primer is hard) Fuel Rail pressure is about 250-290 and goes of when not cranking.
The engine did previously start ran sweet - took ages to start and since standing cant get it to start.
Only fault codes are dp209 something to do with egr valve positioning. Ive blanked of the egr and noticed a wire is broken in the plug. Would this cause it to not start?
Immobiliser light goes off too.
Its trying to start and a little bit of smoke coming out but just wont grrr. Help !!:devil::confused::crazy:: Mad:: Moonie:
Aucun commentaire:
Enregistrer un commentaire